
Sensors & Probes
Chlorine dioxide
How to measure chlorine dioxide in water?
SYCLOPE offers different probes for the measurement of chlorine dioxide in drinking water or other industrial processes. Chlorine dioxide has a strong oxidizing power and is particularly used in hot water processes.
What are the advantages of these probes?
The PLUS for your use
Chlorine Dioxide Probe CAA2540 and CAA2541
Applications
- Drinking water
- Sanitary hot water
Measure
- Chlorine dioxide
Measuring range
- 0,02 – 2 ppm (CAA2541)
- 0,1 – 10 ppm (CAA2540)
pH range
- 5,5 – 11 pH
Temperature range
- 5 – 45°C (with temperature compensation)
Maximum pressure and flow rate
- 1 bar
- Mini : 20 l/h
- Maxi : 100 l/h
- Recommended : 30 l/h
Start-up time and final calibration
- First calibration after 2 h
- After 24 hours
Membrane lifetime
- Normally 1 year (depending on water quality)
Material and type of protection
- PVC black
- IP 65
Power supply and output signal
- 16 – 24 VDC
- 4-20 mA
Chlorine Dioxide Sensors CAA2559 and CAA2571
Applications
- Drinking water
- Sanitary hot water
- Process water
Measure
- Chlorine dioxide
Disturbance by other oxidants
- Chlorine
- Chlorites
- Ozone
Measuring range
- 0 – 1 ppm
pH range
- 5 – 9 pH
Temperature range
- Drinking water: 5 – 50 °C
- Hot sanitary water : 5 – 70°C
Maximum pressure and flow rate
- 8 bars
- Mini : 20 l/h
- Maxi : 80 l/h
- Recommended : 30 l/h
Start-up time and final calibration
- First calibration after 2 h
- After 24 hours
Membrane lifetime
- Normally 1 year (depending on water quality)